IXES Forsa 7
	You are a craftsman and you will settle for nothing less than well made quality finished products. Whether the item at hand is a piece of furniture; fitted kitchen units; made to measure bedrooms or quality shop fittings, the job at hand will probably place big demands on you. They will probably tax your expertise to the limits. You will probably be faced with oversized materials to work with, unusual angles, modern coatings, expensive solid timbers. Whatever the task in front of you, face it confidently with an IXES panel saw. The versatile and well constructed cutting modes and adjustment possibilities give precise results every time. The high performance motors with minimal vibration levels guarantee a finish that will delight the most demanding craftsman. Whether working in solid timbers or laminated materials an IXES panel saw will give you desired results. The versatility of IXES panel sizing saws will also ensure that you remain flexible whatever job comes your way. With the Forsa 7 you are better equipped for whatever project comes your way. You have all the technological advantages of the Forsa 5 plus the convenience of greater cutting length. Forsa 7 offer you: • Cutting length of 2600mm. • Innovative design. • Sliding table length = cutting length. • Cutting depth of 107mm. • Optional sliding cross sectional table with stable telescopic arm. • Choice of scoring attachment or special TCT sawblade - without pre scoring - for splinter free cutting. Even with the largest panels you get cutting efficiency. With a Forsa 57 installed in your workshop you can now satisfy all your customer demands. • Precision cast iron saw table; hard wearing; resistant to distortion; perfectly level. • A cutting speed of 66m/second guaranteeing optimum cutting results. • Hardened anodised aluminium sliding table beam runs flush with the sawblade on hardened bearings for precision movement. • Poly-V- belt drive system for maximum power transmission with minimum noise level. Flexible adjustment possibilities. You can set and reset the Forsa 7 frequently for differing projects without costly "shut down" time. Quickly recouping the outlay cost. • Patented Duplex system for rapid and final adjustment of sawblade height setting from 0 to 107 mm and angle setting from -2 to +45 degrees. • Stable rip fence eliminates possibility of flexing under side pressure. Can be mounted from above. Optional micro attachment with magnifying inspection glass offers 1/10th mm accuracy. • Telescopic cross cutting fence with up tp 2500 mm capacity. Comes with turnover stop equipped with micro attachment. Standard Equipment Solid, torsion-free steel construction, precision ripping fence with turning fence rail and magnifying glass, cross-cut/mitre gauge, sliding table beam, table length extension, sliding table guide with tempered balls, sawblade guard with extraction hose, suction connector, push stick, push grip, assembly tools and cast iron saw table.
	Cutting depth to 107mm - quick and precise adjustment for large work pieces.			Hard wearing Pertinax table insert for exact flush positioning in cast iron work table. Offer maximum precision.
	Micro setting attachment with magnifying inspection glass. Optional.			Large sliding cross table with telescopic support arm (optional).
	Technical Information Dimensions (L/W/H) Table Size Table Height Sliding Table Carriage Sawblade Ø mm / Teeth Rise and fall adjustment Tilting Range Speed Cutting Speed Ripping Fence Length Angle Fence Suction Connection Weight Cutting Information Cutting Height at 90° Cutting Height at 45° Cutting Width or Depth with Ripping Fence Cutting Width with Table Width Extension Cutting Width with Sliding Table Carriage				Forsa 7 2610 mm x 900 mm x 1225 mm 440 mm x 812 mm 850 mm - 950 mm 2600 mm 315 mm/48 0-107 mm -2° to +45° 4000 rpm 66 m/sec 800 mm 2 x 60° 100 mm Ø 277 kgs 107 mm 75 mm 425 mm 1150 mm 2600 mm
	Motor Information Power Input Power Output Motor Speed Brake Motor Protection Switch/plug Unit with No Volt Release				230v/50Hz 3.0 kw (4.1 hp) 2.2 kw (3.0 hp) 2800 rpm yes yes yes	400v/50Hz 4.0 kw (5.4 hp) 2.9 kw (4.0 hp) 2800 rpm yes yes yes
	Optional Accessories • Transverse table with telescopic arm and fence rail • Fine adjustment for ripping fence • Table width extension • Transport set with hoisting apparatus • Wheel set with hook-in bracket. • Machine feet • Transport set • Clamping attachment • Scoring attachment