Mafell Erika 60E
With the optimum air flow in the suction channel, chips can be more easily removed by your vacuum unit. At 21 kg (46.3 lbs), the ultra-lightweight is convenient for use on any floor. Whether in the cellar or in the attic – the ERIKA 60 E can be carried quickly and effortlessly from one workplace to another. Operation of the ERIKA 60 E is simple in its design concept. Clearly designed operating elements are all arranged logically on the front of the machine. Over 20 years of experience have gone into every detail. Stability where it’s needed – on the table! Especially when cutting, the craftsman exerts pressure on the workpiece and thus also on the benchtop. Attention ERIKA-users: All accessories of the previous models ERIKA 55 and ERIKA 60 can continue to be used on the new ERIKA 60 E. • Ultra-light 21 kg (46.3 lbs) • Precise cuts • Comprehensive range of optional accessories • New type of suction channel revolutionises extraction – for less dust when working. • Maximum cutting height of 61 mm (23/8 in.) – with a material thickness of 12 mm (1/2 in.), a cutting length of 215 mm (87/16 in.) is achieved. • For hidden cuts – the riving knife can be lowered with no effort.
The ERIKA with the Hand Router LO 65 E fixed on the table extension. In this way you quickly have a practical routing unit (optional accessory).
Assembling and disassembling the ERIKA is a simple one-man job. You can unfold the built-in fold-away support within seconds and without tools.
	Thanks to optimum stiffening, the table profile is particularly stable.
		Precise and tear-free – this describes the cuts of the new ERIKA Pull-Push Saw.
		Do you cut plastic channels, as shown here? No problem with the new ERIKA.
		Ergonomically designed handle inlets make working with the ERIKA even easier.
		The on-off switch is on the right. You operate the machine only with your right hand. Your left hand remains on the workpiece.
		The graduated scale to adjust the tilt range.
		Rounded plastic edges prevent injuries and facilitate the attachment of accessories. In the dovetail profile, all accessories are held absolutely firmly in place.
Supplied with: • 1 TCT saw blade 190 x 1.2/2.0 x 30 mm (71/2 in.), AT, 36 teeth Ref. No. 092550 • 1 universal guide fence with turn-off 15° detent Ref. No. 200941 • 1 aspiration set Ref. No. 200860 • 1 push stick Ref. No. 034901 • 4 m (13.1 ft) mains cable with plug.
Technical data Universal motor – voltage – frequency Nominal input Nominal output Saw blade speed (no load) Saw blade speed (nominal load) Cutting speed Cutting length with material thickness Cutting height (measured vertically) Cutting height at 45° (measured vertically) Tilt range Saw blade diameter Table top dimensions Weight Table height Extractor connection			ERIKA 60 E 230 V - 50 Hz 1300 W (1.7 hp) 750 W (1 hp) 4720 rpm 4400 rpm 44 m/s (144,4 ft/sec.) 215 mm/12 mm (87/16 in./1/2 in.) 5 – 63 mm, (3/16 – 21/2 in.) 3 – 45 mm (1/8 – 13/4 in.) -2°/0° to 45°/47° 190 x 30 mm (71/2 in. x 13/16 in.) 412 x 544 mm (161/4 x 217/16 in.) 21 kg (46.3 lbs) 300 mm (1113/16 in.) 58 mm (25/16 in.)
Accessories A Fold-away support Ref. No. 203153 Sliding table Ref. No. 201320 Fence guide extension cpl. with telescopic rod and drop stop. Ref. No. 201331 Extension and router table. for mounting LO 50 E (2 supporting rails required). Ref. No. 203131 Router adapter kit Ref. No. 203130 Supporting rail 650 mm (25-9/16 in.) long. Ref. No. 201309 6 Supporting rail 840 mm (33-1/16 in.) long. Ref. No. 201310 Universal guide fence with turn-off 15° detent. Ref. No. 200941 Chip bag Ref. No. 039829 TCT saw blade for universal use 190 x 1.2/2.0 x 30 mm (7-1/2 in.), AT, 36 teeth. Ref. No. 092550 TCT saw blade for universal use 180 x 1.2/1.8 x 30 mm (7-1/16 in.), AT, 30 teeth. Ref. No. 092511 TCT saw blade for laminate 180 x 1.2/2.0 x 30 mm (7-1/16 in.), AT, 56, teeth, chamfered. Ref. No. 092527