Everything to hand
This box of tricks contains everything you need when working on site, for cutting panels to size, sawing shadow gaps, and shortening doors. The relevant sawing system is quickly assembled whatever the job. In conjunction with the innovative Flexi-Guide, the compact and rugged KSP 40 portable circular saw provides an ideal for solution for practically every type of cut. Supplied together with a practical carrying case, it's an unbeatable combination.
Big benefits in a small package
At the core of the sawing system is the KSP 40 portable circular saw. Built to MAFELL's renowned quality standards with a magnesium die-cast housing, the handy KSP 40 is persuasive in every respect. A new MAFELL high-output motor delivers sufficient power for every application, including plunge cuts which, thanks to the FLIPPKEIL plunging system, can be executed without detaching the riving knife.
- Three saws in one: portable circular saw with pivoting guard, plunge-cut saw, shadow gap saw
- Practical 40 mm (1 9/16 in.) Cutting depth range on Flexi-Guide
- First saw in its class with a lever to retract the pivoting guard
- Parallel fence doubles up as auxiliary rest
- Precise vertical guidance and exact cutting depth scale
- Bevel cuts up to 45°
- Pivot point alongside rail. Only one marking pointer irrespective of angle and with or without rail
- Spindle stop and starting lockout
Only from MAFELL: guide rail in carrying case
Just 1 mm thick and with an effective length of 1400 mm, the roll-up and space-saving special steel Flexi-Guide is a genuine highlight. Its rubber lip rules out tears, and the structured anti-slip footprint ensures an excellent grip on the work.
The complete KSP 40 Flexistem is immediately to hand in the practical MAFELL-MAX carrying case.
World first: The special steel guide rail can be rolled up to save space.
Separate riving knives are a thing of the past - when the blade enters the work, the MAFELL-Flippkeil stays right where you need it: attached to the saw.
• KSP 40 Flexistem,
Ref. No. 915801
• 1 MAFELL-MAX carrying case
Ref. No. 095042
• 1 Flexi-Guide FX 140
Ref. No.
• 1 TCT sawblade 120 x 1.2/1.8 x 20 mm (4 3/4 in.) / 24 alternating teeth
Ref. No. 092558
• 1 Parallel fence
Ref. No. 203180
• 2 Clamping claws
Ref. No. 203773
Cutting depth off rail
Cutting depth on rail
Saw blade Ø
Tilt range
Flexi Guide effective length
Nominal power consumption
Universal motor
Weight
0 – 42mm (0 - 1 5/8 in.)
0 – 40mm (0 - 1 9/16 in.)
120 mm (1.2/1.8 x 20mm)
0 – 45°
1400mm (55 1/8 in.)
900w (1/2hp)
voltage 230 V– frequency 50/60 Hz
2.3 kg (5.1 lbs)
• TCT sawblade 120 x 1.2/1.8 x 20 mm (4 3/4 in.) / 24 alternating teeth, for universal use
Ref. No. 092558
• TCT sawblade 120 x 1.2/1.8 x 20 mm (4 3/4 in.) / 40 flat/trapezoidal teeth, for fine sawing
Ref. No. 092559
• TCT sawblade 120 x 1.2/1.8 x 20 mm (4 3/4 in.) / 12 alternating teeth, for ripping
Ref. No. 093560
• Screw clamps for fixing Flexi-Guide to work
Ref. No. 093281