Mafell KSP55F
At MAFELL you can find the plunge cut saw that plunges safely, because the riving knife is where it should be during plunge cutting: at the saw. A 1100 W (1.5 hp) “MAFELL-made” motor is the heart of this portable circular saw. The aim here was to design a robust, easy-to-handle machine for the joiner and carpenter suitable for everyday use. The highlight: novel twin-located height adjustment, with which the machine can also be used as a plunge cut saw – the riving knife disappears into the protective cover when plunge cutting. Like all our portable circular saws, the KSP 55 F also fits onto the MAFELL guide rail system. As a package this is so reasonably priced that sawing without a guide rail will become the exception. • Plunge Cut System with • Long service life • Lightweight • With the MAFELL KSP 55 F, it is no longer necessary to unscrew the riving knife – the offers you optimum user-friendliness and safety when plunge cutting (see page 14). • Parallel guide fence with dual function – on both machine sides as parallel guide fence and as additional bench support, e.g. for bevel cuts. • High quality standard means lower machine costs and longer service life. • Healthy working environment – due to a clean workplace and a clear view of the saw blade thanks to optimal dust extraction with the MAFELL S 25 M and S 50 M Vacuum Units.
				• The saw blade is positioned 2 mm (1/16 in.) above the lower edge of the machine base plate by means of the stable, smooth-running height rail. • In this position, the workpiece is no longer in contact with the saw blade. • This position is secured against unintentional plunge cutting by an upper dead centre (KSP series, KSS 330) or an automatic detent switch (KST). • Without moving the machine forward, the saw blade can now be plunged directly into the material. • The sprung automatically remains in the protective cover and rests on the workpiece. • Optimum control of the plunge cutting process due to: • As soon as there is a forward movement of the machine, the automatically snaps into the saw cut. • This ensures maximum user safety when sawing. • Disassembly and re assembly of the riving knife, which was necessary up to now in order to be able to carry out plunge cuts, is no longer required! • The riving knife always remains on the machine!
			The guide rail can be tightly fixed to the workpiece with the screw clamp. It can be used for both 90° and angle cutting.
Supplied with: • 1 TCT saw blade, 160 x 1.2/1.8 x 20 mm (65/16 in.), AT, 24 teeth Ref. No. 092533 • 1 parallel guide fence, cpl. Ref. No. 201436 • 1 hose connector for chip extraction Ref. No. 200042 • 1 Allen key WAF 5 Ref. No. 093034
Technical data Cutting depth Saw blade Ø Tilt range Nominal no-load speed Normal load speed Cutting speed – nominal load Universal motor Nominal input Nominal output Weight	KSP55F 0 – 55mm (0 - 23/16 in.) 160 mm (65/16 in.) 0 – 45° 4400 rpm 2770 rpm 23 m/s (75.5 ft/sec.) voltage 230 V – frequency 50/60 Hz 1100 W(1) (1.5 hp) 630 W(1) (0.8 hp) 4.0 kg (8.8 lbs)
Accessories Guide rail FS 140 1.4 m (4.6 ft) long, Ref. No. 202870 Guide rail FS 300 3 m (9.8 ft) long, Ref. No. 202869 Screw clamp for fixing guide rail to workpiece Ref. No. 093277 Mushroom-shaped handle, as additional machine guide, cpl. with fixing screw Ref. No. 201451 TCT saw blade for universal use 160 x 1.2/1.8 x 20 mm (65/16 in.), AT, 24 teeth Ref. No. 092533 TCT saw blade for ripping cuts 160 x 1.2/1.8 x 20 mm (65/16 in.), AT, 16 teeth Ref. No. 092539 TCT saw blade for fine cuts 160 x 1.0/1.7 x 20 mm (65/16 in.), AT, 32 teeth Ref. No. 092506