Mafell LNF20
Now with extra features…and all conveniently integrated in the MAXELL-MAX. Ideal for the biscuit jointing fanatics amongst you! One turn of the revolving depth control turret adjusts the tool to all conventional flat dowel sizes. The tilt stop can be fixed with detents of 0°, 22.5°, 45°, and 67.5° up to 90°. Torsion-free cast angle stop and height adjustment make your work easier while 2 sturdy adjusting bolts keep your setting constant even after your 100th cut. All you need is “on board” in the MAX: practical containers for your dowels, space for the optional pitch pocket cutter, anti-slip mat and of course your LNF 20.
• Ergonomic design.
• In MAFELL-MAX.
• Complete set of accessories.
• Double column guide for height adjustment – ensures exact, torsion-free adjustment.
• With above average 750 watt (1 hp) rating – for professional continuous use.
• The on/off switch is easily and conveniently operated with your thumb – for right-handed and left-handed users.
Mitred joints with the LNF 20.

 Groove height adjustment via revolving depth control turret or via scale.
The LNF 20 is supplied in the practical MAFELL MAX.
 Optional accessory for the LNF 20: Pitch pocket cutter,Ref. No. 091793
Supplied with:
• 1 disk cutter, TCT, 100 x 4 x 22 mm (315/16 x 3/16 x 7/8 in.), 6 teeth
Ref. No. 076905
• 1 ejection pipe, mounted
Ref. No. 076954
• 1 hose connector
Ref. No. 076955
• 1 dust bag cpl.
Ref. No. 076956
• 1 screwdriver for recessed- head screws
Ref. No. 093283
• 1 face pin spanner
Ref. No. 093119
Technical data
Cutting tool
Cutting depth
Tilt range
Nominal no-load speed
Normal load speed
Cutting speed (with standard tools)
– nominal load
Universal motor – voltage
– frequency
Nominal input
Nominal output
Weight

LNF 20
Ø 100 mm (315/16 in.)
19 mm (3/4 in.)
0 - 90°
9800 rpm
6850 rpm

28.7 m/s (94.2 ft/sec.)
230 V
50/60 Hz
750 W (1 hp)
400 W (0.5 hp)
3.1 kg (6.8 lbs)
Accessories

Disk cutter,
100 x 4 x 22 mm (315/16 x 3/16 x 7/8 in.),
TCT, 6 teeth
Ref. No. 076905





Pitch pocket cutter,
100 x 8 x 22 mm (315/16 x 5/16 x 7/8 in.),
TCT, 2 teeth
Ref. No. 091793





Perspex base plate,
for use with the pitch pocket cutter,
Ref. No. 076965






Anti-slip mats, 2 pcs.
Ref. No. 095063