Mafell LO50E
The “freehand” router for individual use. Whether you use it for lettering, ornaments or decorations or “only” for chamfering, mortising, cutting grooves or rebating – with the LO 50 E it’s all within your grasp! The LO 50 E is equipped with a 50 mm (115/16 in.) Cutting depth and a speed of 10000 to 22000 rpm. The pistol handle is ideal for keeping the machine “on track” even for the most difficult cutting work. The control electronics keep the pre-set speed constant and guarantee smooth start-up. The fine adjustment of the cutting depth can be fixed exactly, making refinishing an exception. To replace the cutter quickly and easily, simply turn the LO 50 E upside down. A standard spindle locking mechanism is fitted as a matter of course. • Lightweight • Guide track and router guide device for cutting housings in staircase strings as optional accessory • Ergonomic pistol handle – for optimum operation. • Fine adjustment for cutting depth and lateral stop plate. • Individual setting of speed, cutting depth and guide – for a wide variety of applications.
	Stylish profiling with the spacer disc cutter. Flush trimming of protruding veneers.
Adjusting the cutting depth by means of three-position revolving depth control turret.
Supplied with: • 1 parallel guide fence with fine adjustment • 1 template guide 20 mm (13/16 in.) Ref. No. 200693 • 1 collet x 8 mm Ref. No. 076441 • 1 chip collector Ref. No. 038986 • 1 single-end spanner WAF 19 Ref. No. 093012 • 4 m (13.1 ft) mains cable with plug Ref. No. 087323
Technical data Cutting depth Speed – electronically stabilised Tool fastening – Standard collet chuck – Alternative collet chuck Universal motor – voltage – frequency Nominal input Nominal output Weight		LO 50 E 0 – 50 mm (0 – 115/16 in.) 10000 – 22000 rpm 8 mm Ø (5/16 in.) 6 mm Ø (1/4 in.) 230 V 50/60 Hz 1000 W(1) (1.3 hp) 590 W(1) (0.8 hp) 2.7 kg (6.0 lbs)
Accessories Router guide device for cutting housings in staircase strings, with 1 m (3.3 ft) guide track and 2 screw clamps, Ref. No. 200500 Guide track, 1 m (3.3 ft) long, with adapter, Ref. No. 200690 Screw clamp for guide track, Ref. No. 093249 Angle stop for Ref. No. 200 690 Ref. No. 038108 Collet 6 mm, Ref. No. 093270 8 mm, Ref. No. 076441 1/4”, Ref. No. 093271 Template guide, Ø 10,8 mm (7/16 in.), Ref. No. 200694 Ø 13,8 mm (9/16 in.), Ref. No. 200695 Ø 20 mm (13/16 in.), Ref. No. 200693 Ø 27 mm (11/16 in.), Ref. No. 038988 Ø 30 mm (13/16 in.), Ref. No. 038971 Ø 40 mm (19/16 in.), Ref. No. 038989