Mafell MKS125E
With the portable circular saws from 105 mm (41/8 in.) to 125 mm (415/16 in.) Cutting depth, MAFELL offer the lightest machines in their class! This unique weight/performance ratio is only possible due to the use of high quality materials such as die-cast aluminium and elaborate finishing. The power is provided by the MAFELL motor, which is planned, produced and assembled at MAFELL’s own premises and provides the machines with the right cutting power. The product that we supply provides irrefutable evidence of the fact that we listen to what craftsmen tell us: Tiltable to 60° - a clear view of the saw blade, remote control of the retractable knife guard, friction clutch and the fence and guide system. The MKS 125 E is equipped with intelligent control electronics. These ensure a smooth start-up and constant speed under load, as well as speed reduction to protect the machine when idling and overload protection. • Lightweight • Powerful motor • Tiltable to 60° • High quality standard means lower machine costs and longer service life. • Parallel guide fence with dual function – on both machine sides as parallel stop and as additional bench support, e.g. for bevel cuts. • Lower saw guard with remote control – for easy release of the saw blade, e.g. when positioning at acute angles, indispensable for mitre and rafter cuts. • Sophisticated, distorsion-resistant cast components – for cutting precision and robustness with minimum weight.
	Ripping cuts with full cutting depth require powerful machines such as the MKS125E.
	The MKS125E is equipped with intelligent control electronics. These ensure a smooth start-up and constant speed under load, as well as speed reduction to protect the machine when idling and overload protection.
	Why cut chipboard panels to length individually when the MKS125E can glide through a whole stack?
Supplied with: 1 TCT saw blade (MKS 125 E)355 x 2.2/3.2 x 30 mm (14 in.), AT, 16 teeth Ref. No. 092 437 1 parallel guide fence. Ref. No. 035 115 1 hose connector, cpl. for chip extraction. Ref. No. 039 296 1 Allen key WAF 6. Ref. No. 093 081 1 ring spanner WAF 56. Ref. No. 035 117 10 m (32.8 ft) mains cable with plug. Ref. No. 087 612
Technical data Cutting depth, vertical Cutting depth at 45° Cutting depth at 60° Saw blade Ø Tilt range Nominal no-load speed Normal load speed Cutting speed – nominal load Universal motor Nominal input Nominal output Weight		MKS125E 47 – 125 mm (17/8 - 415/16 in.) 39 – 92 mm (19/16 - 35/8 in.) 28 – 66 mm (11/8 -25/8 in.) 355 mm (14 in.) 0 – 60° 2170 rpm 1990 rpm 37 m/s (121.4 ft/sec.) – voltage 230 V – frequency 50/60 Hz 2100 W(1) (2.8 hp) 1420 W(1) (1.9 hp) 13.3 kg ( 29.3 lbs)
Accessories Guide rail 3 m (9.8 ft) long (2 pieces with connecting piece) Ref. No. 037 037 Guide rail 3 m (9.8 ft) long (one piece) Ref. No. 200 672 Guide rail extension1.5 m (4.9 ft) Ref. No. 036 553 Adapter pair for parallel guide fence Ref. No. 037 195 TCT saw blade for universal use and ripping cuts 355 x 2.2/3.2 x 30 mm (14 in.), AT, 16 teeth Ref. No. 092 437 TCT saw blade for fine cuts 355 x 2.2/3.2 x 30 mm (14 in.), AT, 32 teeth Ref. No. 092 448