Mafell MKS145E
Carpenter’s portable circular saws with extraordinary weight/performance ratio. Only possible due to the use of ultra-modern die-cast magnesium alloys. Tiltable to 60°. That makes the portable circular saws a universal partner. An easy-to-read scale on the cutting depth adjustment makes work easier and saves tiresome re-measurement. Like all our portable circular carpentry saws, these two saws also fit snugly onto the MAFELL guide rail system.

Equipped with intelligent control electronics. These ensure a smooth start-up and constant speed under load, as well as speed reduction to protect the machine when idling and overload protection.

• Large cutting depths
• Maximum stability with minimum weight
• Tool brake
• With tool brake – for optimum operator safety and work processes.
• Constant cut display for 0 - 60° - due to exact centre of rotation, which is on the underside of the base plate.
• Lower saw guard with remote control – for easy release of the saw blade, e.g. when positioning at sharp angles.
Top results, as shown here with the MKS145E, can only be achieved with original MAFELL tools.
The cutting depth can be adjusted easily via a precise handwheel.
The tilt range of 0° - 60° enables extreme bevel cuts.
The constant cut display.
Supplied with:

1 TCT saw blade (MKS145E) 370 x 2.2/4.2 x 30 mm (149/16 in.), AT, 26 teeth
Ref. No. 092526

1 hose connector for chip extraction, inner - Ø 58 mm (25/16 in.)
Ref. No. 202203

1 Allen key WAF 6
Ref. No. 093081

1 parallel guide fence

10 m (32.8 ft) mains cable with plug
Technical data
Cutting depth
Saw blade Ø
Tilt range
Nominal no-load speed
Normal load speed
Cutting speed
Universal motor

Nominal input
Nominal output
Weight

 MKS 145 E
65 – 145 mm (29/16 - 511/16 in.)
370 mm (149/16 in.)
0 – 60°
1980 rpm
1860 rpm
– nominal load 36 m/s (118.1 ft/sec.)
– voltage 230 V
– frequency 50/60 Hz
2600 W (3.5 hp)
1660 W 2.2 hp)
16.7 kg (36.8 lbs)
Accessories

Guide rail 3 m (9.8 ft) long (2 pieces with connecting piece)
Ref. No. 037037

Guide rail 3 m (9.8 ft) long (one piece)
Ref. No. 200672

Guide rail extension 1.5 m (4.9 ft) long
Ref. No. 036553

Adapter pair for parallel guide fence
Ref. No. 037195

TCT saw blade for universal use 370 x 2.2/4.2 x 30 mm (149/16 in.), AT, 26 teeth
Ref. No. 092526

TCT saw blade for ripping cuts 370 x 2.2/4.2 x 30 mm (149/16 in.), AT, 18 teeth
Ref. No. 092524