Mafell MKS165E
Carpenter’s portable circular saws with extraordinary weight/performance ratio. Only possible due to the use of ultra-modern die-cast magnesium alloys. Tiltable to 60°. That makes the portable circular saws a universal partner. An easy-to-read scale on the cutting depth adjustment makes work easier and saves tiresome re-measurement. Like all our portable circular carpentry saws, these two saws also fit snugly onto the MAFELL guide rail system. Equipped with intelligent control electronics. These ensure a smooth start-up and constant speed under load, as well as speed reduction to protect the machine when idling and overload protection. The easy-to-use stop system of the MKS165E and the adjustable hose connector make your work much easier. • Large cutting depths • Maximum stability with minimum weight • Tool brake • With tool brake – for optimum operator safety and work processes. • Constant cut display for 0 - 60° - due to exact centre of rotation, which is on the underside of the base plate. • Lower saw guard with remote control – for easy release of the saw blade, e.g. when positioning at sharp angles.
		Top results, as shown here with the MKS165E, can only be achieved with original MAFELL tools.
		The cutting depth can be adjusted easily via a precise handwheel.
		The tilt range of 0° - 60° enables extreme bevel cuts.
	The constant cut display.
Supplied with: 1 TCT saw blade 410 x 2.5/4.2 x 30 mm (161/8 in.), AT, 28 teeth Ref. No. 092525 1 hose connector for chip extraction, inner - Ø 58 mm (25/16 in.) Ref. No. 202203 1 Allen key WAF 6 Ref. No. 093081 1 parallel guide fence 10 m (32.8 ft) mains cable with plug
Technical data Cutting depth Saw blade Ø Tilt range Nominal no-load speed Normal load speed Cutting speed Universal motor Nominal input Nominal output Weight			MKS 165 E 85 – 165 mm (33/8 - 61/2 in. ) 410 mm (161/8 in.) 0 – 60° 1585 rpm 1450 rpm – nominal load 31 m/s (101.7 ft/sec.) – voltage 230 V – frequency 50/60 Hz 2700 W (3.6 hp) 1730 W (2.3 hp) 17 kg (37.5 lbs)
Accessories Guide rail 3 m (9.8 ft) long (2 pieces with connecting piece) Ref. No. 037037 Guide rail 3 m (9.8 ft) long (one piece) Ref. No. 200672 Guide rail extension 1.5 m (4.9 ft) long Ref. No. 036553 Adapter pair for parallel guide fence Ref. No. 037195 TCT saw blade for universal use 410 x 2.5/4.2 x 30 mm (161/8 in.), AT, 28 teeth Ref. No. 092525 TCT saw blade for ripping cuts 410 x 2.5/4.2 x 30 mm (161/8 in.), AT, 20 teeth Ref. No. 092522