Mafell NFU32
The NFU 32 is unique, unrivalled and only available from MAFELL! The ideal machine for longitudinal or transverse grooves, barge boards let into rebated rafters, panel fillings in timber-framed buildings or intermediate floors. With a maximum cutting width of 26.5 mm (11/16 in.) and depth of 32 mm (11/4 in.), the NFU 32 can execute most types of grooving work. The cutting depth can be set steplessly. The cutting width is set quickly and easily with eccentric disks. Details such as the exact column guide or the torsion-free router table guarantee a 100 % exact cutting result. The secret: With the optional guide track, the cutting angle can be set in seconds. Simply set the machine on the rule and cut the groove – no more time-consuming measuring and scoring of the angle! • Special machine for grooves • Expanding grooving cutter • Guide track on both sides of machine – for various applications. • Special machine, designed for woodwork cuts – for high power reserves and long service life.
Guide track with sliding bevel and adapter as optional accessory.
Once angle is set on the scale, you can cut your grooves on the right...		…or on the left of the rafter with the guide track (optional accessory). The angle can be adjusted quickly.					The width of the expanding grooving cutter is adjusted with a combination of different spacer rings.
Supplied with: • 1 expanding grooving cutter with reversible knives 125 x 15,4 – 26.5 x 30 mm (415/16 x 5/8 – 11/16 x 13/16 in.) Ref. No. 091418 • 1 parallel guide fence Ref. No. 034890 • 1 Allen key WAF 4 Ref. No. 093074 • 1 Allen key WAF 6 Ref. No. 093081 • 1 ring spanner WAF 45 Ref. No. 093247 • 4 m (13.1 ft) mains cable with plug Ref. No. 087323
Technical data Cutting tool – as standard Cutting depth Tilt range Nominal no-load speed Normal load speed Cutting speed – nominal load Universal motor – voltage – frequency Nominal input Nominal output Weight				NFU32 125 x 15,4 – 26.5 mm (415/16 x 5/8 – 11/16 in.) 0 - 32 mm (0 – 11/4 in.) 0 - 45° 4500 rpm 2440 rpm 16 m/s (52.5 ft/sec.) 230 V 50/60 Hz 1600 W (2.1 hp) 1120 W (1.5 hp) 8.0 kg (17.6 lbs)
Accessories Expanding grooving cutter with reversible TCT knives, 125 x 15.4-26.5 x 30 mm (415/16 x 5/8 – 11/16 x 13/16 in.) Ref. No. 091418 Guide track with sliding bevel and adapter 1 m (3.3 ft) Ref. No. 201546 Reversible scoring knife (4 pieces required) TCT 14 x 14 x 2 mm (9/16 x 9/16 x 1/16 in.) Ref. No. 034907 Flat-head screw for scoring knife Ref. No. 034907 Ref. No. 053006 Reversible TCT knife (4 pieces required) for expanding grooving cutter 15 x 12 x 1.5 mm (9/16 x 1/2 x 1/16 in.) Ref. No. 201544