Mafell SKS130
The SKS 130 – the world’s first portable special machine for mortising door locks. The security needs of many house and apartment owners have increased considerably, so that more and more security locks are being fitted. At 1600 watts (2.1 hp), the SKS 130 cuts door locks of all sizes – completely tear-free! The SKS 130 is clamped onto a large surface of the door. Due to the Pertinax/rubber surface of the clamping device, the door surface remains protected, whether mounted on site or in the workshop. • Clean, quick, tear-free cuts • For use on the construction site • Two clear guide systems – for doors with and without upstand. • Two special mortising chains in opposite directions – for tear-free work and optimum chip flow. • Handy, ergonomic, compact construction – for on-site work on mounted doors.
And this is how it works: just follow the markings for easy adjustment of doors with or without upstand. For doors with upstand the red marking is used.				The measurement between the rebate and the middle of the lock is set, the exact mortising depth is fixed with the fixing device. Finished! For doors without upstand the black marking is used.
Mortising lengths of 78 mm (31/16 in.) and mortising widths of 16 mm (5/8 in.) are possible with one cut. Wider and longer slots can also be made to the exact millimetre by following up with the SKS 130.				The chain bars are maintenance-free and do not need to be re-greased. The tool for chain replacement or re-tensioning is always close at hand on the machine housing.
Fitted onto a large area of the door, the SKS 130 has an optimum grip – vertically and horizontally.				Clean, quick, tear-free cuts.
Two special mortising chains in opposite directions ensure tear-free work and optimum chip flow.				The beginning and end of the slot are exactly indicated by the markings on the protective cover.
No longer a problem: quick, precise lock mortising is now possible on a mounted door.
Supplied with: • 2 chain bars cpl. Ref. No. 091000 • 2 mortising chains Ref. No. 091001 • 2 sprockets Ref. No. 091002 • 1 Allen key WAF 5 Ref. No. 093278 • 4 m (13.1 ft) mains cable with plug Ref. No. 087323 • 1 carrying case
Technical data Mortising depth Mortising width Mortising length Stroke/working travel Nominal no-load speed Normal load speed Cutting speed Universal motor – voltage – frequency Nominal input Nominal output Weight		SKS 130 145 mm (511/16 in.)/130 mm (51/8 in.) 14, 16, 18 mm (9/16, 5/8, 11/16 in.) 78 mm (31/16 in.) 175 mm (67/8 in.) 5770 rpm 4370 rpm 8,6 m/s (28.2 ft/sec.) 230 v 50/60 Hz 1600 w (2.1 hp) 950 w (1.3 hp) 10.0 kg (22 lbs)