Mafell STA65E
Oscillating Jig Saws Developed for continuous daily use. With 700 watts (0.9 hp) nominal input, the MAFELL jig saws can perform cutting depths of 100 mm (315/16 in.). Due to the 4-step oscillating stroke control and the infinitely variable number of strokes from 500 to 3000 rpm, you always have the right setting for your material. The stable guide plate made of die-cast aluminium provides you with integrated extraction and particular with an excellent, even surface for right-angled cuts. The differences in the MAFELL oscillating jig saws lie in the various handle designs. The STAK 65 E with knob handle, the STAB 65 E with bow handle and integrated permanent illumination of the cut and the STA 65 E with combined bow/knob handle. • 4-step oscillating stroke control • Cast base with integrated extraction • Handle design according to individual requirements • Proven saw blade clamping – for extreme loads. • Low-lying saw blade holder – thus allowing both a greater cutting depth and lower gradient with the same saw blade. • Retractable guide plate – for working close to edges.
	The STAB 65 E with its stable bow handle: good for high loads and sure protection for the score illumination.				The STAB 65 E with its illumination on the cut. You’re not groping around in the dark here.
	The STAK 65 E: ideal for working from below.				All jig saws are equipped with a 4-step oscillating stroke control.
Supplied with: 1 MAFELL-MAX 4 m (13.1 ft) mains cable with plug. Ref. No. 913 902 5 jig saw blades with various toothing, 1 splinter guard. Ref. No. 076900 1 saw guard. Ref. No. 076899 1 Allen key WAF 4. Ref. No. 076902
Technical data Cutting depth in: Tilting adjustment, both sides Stroke height No-load number of strokes Universal-motor Nominal input Nominal output Weight		STA 65 E - Wood 65/100 mm (29/16 / 315/16 in.) - Plastic 30 mm (13/16 in.) - Nonferrous metals 20 mm (13/16 in.) - Ceramics/steel 10/10 mm (3/8 in.) 0 – 45° 25 mm (1 in.) 500 – 3000 rpm voltage 230 V frequency 50/60 Hz 700 W(1) (0.9 hp) 490 W(1) (0.7 hp) 2.7 kg (6.0 lbs)
Accessories Parallel guide fence. With circle-cutting guide Ref. No. 092332 5 Jig saw blades, skin-wrapped Tooth pitch 2.5 mm (1/8 in.) for hardwood, softwood, plywood and wood fibre board up to 30 mm (13/16 in.), plastic. Ref. No. 093632 5 Jig saw blades, skin-wrapped Tooth pitch 4 mm (3/16 in.) for hardwood, softwood, plywood and wood fibre board up to 65 mm (29/16 in.), plastic. Ref. No. 093666 5 Jig saw blades, skin-wrapped Tooth pitch 2.5 mm (1/8 in.) for hardwood, softwood, plywood and wood fibre board, suitable for radii, plastic. Ref. No. 093668 5 Jig saw blades, skin-wrapped Tooth pitch 2.5 mm (1/8 in.) push-type For clean, splinter-free upper and visible edges. Ref. No. 093643 5 Jig saw blades, skin-wrapped Tooth pitch 2.5 mm (1/8 in.) push-type For clean, splinter-free upper and visible edges. Ref. No. 093643 5 Jig saw blades, skin-wrapped Tooth pitch 1.2 mm (1/16 in.) for construction steel, nonferrous metal, aluminium alloys 1.5 - 4 mm (1/16 in.- 3/16 .in.), reinforced plastic. Ref. No. 093636 3 Jig saw blades, skin-wrapped Tooth pitch 4 mm (3/16 .in.) for hardwood, plywood and wood fibre board up to 100 mm (315/16 in.), Ref. No. 093667