• Tiltable band side
• Unique weight
Exclusive with 30° tiltable saw band guide on one side for right-angled cuts of up to 9 cm (39/16 in.) cut-outs! Exclusive with ball bearing saw band guidance for excellent band running and thus for optimum cutting. Maximum 8 mm (5/16 in.) saw bands for optimum flexibility when curving and profiling purlins and rafters. The bar offset to the side allows extreme notches and cut-outs as well as concave curves.
The class-leading cutting depth of 305 mm (12 in.) makes the Z3 a universal machine for almost all types of cuts. Precisely angled cuts or with radii of less than 10 mm (3/8 in.) are no problem for the Z 3. In a few seconds the Z 3 converts into a brilliant two-man saw with which you can saw rafters or angled notches.
• The roller covers can be removed without the need for tools – therefore easy clamping/release of the saw band.
• Saw band with front and rear cutting teeth – for reversing in the saw cut without any problems.
• Unusual, versatile cuts – which are otherwise only possible by hand, for example ascending cut lines.
• 1 saw band, 8 mm (5/16 in.) wide, 4 teeth per inch, with front and rear cutting teeth.
Ref. No. 038334
• 1 saw band, 6 mm (1/4 in.) wide, 4 teeth per inch.
Ref. No. 038381
• 1 saw band, 8 mm (5/16 in.) wide, 4 teeth per inch.
• 10 m (32.8 ft) mains cable:
• Z 3 K with CEE-plug 400v.
• 10 m (32.8 ft) mains cable: Z 3 L with plug 230v.
Cutting depth
1 band side tiltable
Nominal no-load speed
Normal load speed
Cutting speed – nominal load
Universal motor – voltage – frequency
Nominal input
Nominal output
Weight
305 mm (12 in.)
0 – 30°
1450 rpm
1350 rpm
14.5 m/s (47.6 ft/sec.)
single-phase 230v 50 Hz
1380 W(2) (1.9 hp)
900 W(2) (1.2 hp)
17.5 kg (38.6 lbs)
Guide rail
3 m (9.8 ft) long (2 pieces with connecting piece)
Ref. No. 037037
Guide rail
3 m (9.8 ft) long (one piece)
Ref. No. 200672
Guide rail extension
1.5 m (4.9 ft) long
Ref. No. 036553
Adapter pair for parallel guide fence
Ref. No. 037195
Trolley
Ref. No. 202110
Parallel guide fence
Ref. No. 039386
10 pcs. band saw blades
for curved cuts 6 mm (1/4 in.) wide,
6 teeth per inch
Ref. No. 092333
10 pcs. band saw blades
for curved cuts 6 mm (1/4 in.) wide,
4 teeth per inch
Ref. No. 092335
10 pcs. band saw blades
for mainly straight cuts 8 mm (5/16 in.) wide,
4 teeth per inch
Ref. No. 092336
10 pcs. band saw blades
for mainly straight cuts 8 mm (5/16 in.) wide,
4 teeth per inch with front and rear cutting
teeth for easy reversing
Ref. No. 092337
