Mafell ZB400E
The ZB400E with poka-yoke rapid locking system for the chuck. Also equipped with electronic speed control, clockwise/counter-clockwise rotation, two-speed mechanical gear, 63mm (2-1/2 in.) clamping collar and centring bolt. Further advantages of the ZB400E include well balanced handles for free-hand operation and overhead work and speed adjustment in accordance with drill bit size and separate stop plate bar for drilling depth setting. All these make the drilling machine indispensable for extreme drilling in the hardest timber. • Powerful motor • Clockwise/counter-clockwise rotation • Tool-less rapid locking - for simple, fast drill bit changes. • Swivelling focussing device - for simple drill bit changes. • High quality standard means longer service life.
The ZB400E for drilling depths up to 350mm (13-3/4 in.).
Supplied with: • 1 auger bit 18 x 650mm (11/16 x 25-9/16 in.) Ref. No. 090205 • 1 focussing device for drill bit diameters 10-28mm (3/8 - 1-1/8 in.) Ref. No. 090215 • 1 adapter for drill bit with MK2 chuck • 10 m (32.8 ft) mains cable with plug
Technical data Drilling depth Tools Tilt range Nominal no-load speed Normal load speed Universal motor – voltage – frequency Nominal input Nominal output Weight		ZB400E 350/475 mm (13-3/4 / 18-11/16 in.) Drill bit 0 - 45° 340-1450 rpm Electronically stable 340-1450 rpm 230 V 50/60 Hz 1200 W (1.6 hp) 760 W (1.0 hp) 16.5/17.7 kg (36.4/39 lbs)
Accessories Special drill mount for ring-groove cutting tools, without face edge stop, Ref. No. 039160 Guide fence, cpl., Ref. No. 039156 Auger bits for drilling depth up to 350mm (13-3/4 in.) for ZB 400, 10 x 650 mm (3/8 x 25-9/16 in.), Ref. No. 090201 12 x 650 mm (1/2 x 25-9/16 in.), Ref. No. 090202 13 x 650 mm (1/2 x 25-9/16 in.), Ref. No. 090222 14 x 650 mm (9/16 x 25-9/16 in.), Ref. No. 090203 15 x 650 mm (9/16 x 25-9/16 in.), Ref. No. 090223 16 x 650 mm (5/8 x 25-9/16 in.), Ref. No. 090204 17 x 650 mm (11/16 x 25-9/16 in.), Ref. No. 090224 18 x 650 mm (11/16 x 25-9/16 in.), Ref. No. 090205 20 x 650 mm (13/16 x 25-9/16 in.), Ref. No. 090206 21 x 650 mm (13/16 x 25-9/16 in.), Ref. No. 090225 22 x 650 mm (7/8 x 25-9/16 in.), Ref. No. 090207 24 x 650 mm (15/16 x 25-9/16 in.), Ref. No. 090208 25 x 650 mm (1 x 25-9/16 in.), Ref. No. 090226 26 x 650 mm (1 x 25-9/16 in.), Ref. No. 090209 28 x 650 mm (1-1/8 x 25-9/16 in.), Ref. No. 090210 30 x 650 mm (1-3/16 x 25-9/16 in.), Ref. No. 090211 Adapter MK to adapt tools for carpentry drilling machine Ref. No. 039139 Ejector for MK 2, Ref. No. 093001