Mafell ZB600E
The ZB600E with poka-yoke rapid locking system for the chuck. Also equipped with electronic speed control, clockwise/counter-clockwise rotation, two-speed mechanical gear, 63mm (2-1/2 in.) clamping collar and centring bolt. Further advantages of the ZB600E include well balanced handles for free-hand operation and overhead work and speed adjustment in accordance with drill bit size and separate stop plate bar for drilling depth setting. All these make the drilling machine indispensable for extreme drilling in the hardest timber. • Powerful motor • Clockwise/counter-clockwise rotation • Tool-less rapid locking - for simple, fast drill bit changes. • Swivelling focussing device - for simple drill bit changes. • High quality standard means longer service life.
The ZB600E for drilling depths up to 475mm (18-11/16 in.).
Supplied with: • 1 auger bit 18 x 820mm (11/16 x 32-5/16 in.) Ref. No. 090215 • 1 focussing device for drill bit diameters 10-28mm (3/8 - 1-1/8 in.) Ref. No. 090215 • 1 adapter for drill bit with MK2 chuck • 10 m (32.8 ft) mains cable with plug
Technical data Drilling depth Tools Tilt range Nominal no-load speed Normal load speed Universal motor – voltage – frequency Nominal input Nominal output Weight		ZB600E 350/475 mm (13-3/4 / 18-11/16 in.) Drill bit 0 - 45° 340-1450 rpm Electronically stable 340-1450 rpm 230 V 50/60 Hz 1200 W (1.6 hp) 760 W (1.0 hp) 16.5/17.7 kg (36.4/39 lbs)
Accessories Special drill mount for ring-groove cutting tools, without face edge stop, Ref. No. 039160 Guide fence, cpl., Ref. No. 039156 Auger bits for drilling depth up to 475mm (18-11/16 in.) 12 x 820 mm (1/2 x 32-5/16 in.), Ref. No. 090212 14 x 820 mm (9/16 x 32-5/16 in.), Ref. No. 090213 16 x 820 mm (5/8 x 32-5/16 in.), Ref. No. 090214 18 x 820 mm (11/16 x 32-5/16 in.), Ref. No. 090215 20 x 820 mm (13/16 x 32-5/16 in.), Ref. No. 090216 22 x 820 mm (7/8 x 32-5/16 in.), Ref. No. 090217 24 x 820 mm (15/16 x 32-5/16 in.), Ref. No. 090218 26 x 820 mm (1-1/32 x 32-5/16 in.), Ref. No. 090219 28 x 820 mm (1-1/8 x 32-5/16 in.), Ref. No. 090220 30 x 820 mm (1-3/16 x 32-5/16 in.), Ref. No. 090221 Adapter MK to adapt tools for carpentry drilling machine Ref. No. 039139 Ejector for MK 2, Ref. No. 093001