Mafell ZK115L
Until now, making notch cuts was a trial-and-error process. The ZK 115 puts an end to this: simply score the notch and vertical cut, set the cut indicator, notch depth and angle – and mortising can begin. It couldn't be quicker or easier. Incidentally, with the ZK 115 L, you have the world’s lightest skew notch, lap-joint and tenon cutting machine in your hand. The ZK 115 K has a 3000 watt (4 hp) high-powered motor for extreme cutting performance. Due to the built-in friction clutch, the ZK 115 L starts up smoothly and cuts through wood as if through butter. The guide rails available as optional accessories can be used with all other MAFELL carpentry machines. • Tilt range 0-60° • Stable height adjustment • Special machine – for all notching and facing tasks. • Fast, precise adjustment – no test cutting necessary – considerable time-saving. • All-round protective cover – for optimum user protection.
		The ZK 115 K with the guide rail.
	Supplied with: • 1 cutter head, cpl., x 150 x 115 mm (57/8 x 41/2 in.) Ref. No. 091427 • 1 parallel guide fence Ref. No. 033030 • 1 pin spanner Ref. No. 093240 • 1 tubular box spanner Ref. No. 093006 • 1 single-end spanner WAF 10 Ref. No. 093020 • 1 locking rod, x 10 mm (3/8 in.) Ref. No. 093084 • 1 adjustment gauge Ref. No. 035849 • 10 m (32.8 ft) mains cable: ZK 115 L with plug 230 V Ref. No. 087612 • ZK 115 K with CEE plug 400 V Ref. No. 094286
Technical data Cutter head (standard) diameter x width - alternatively - alternatively Tilt range Nominal no-load speed Normal load speed Cutting speed (with standard cutter head) nominal load Motor universal three-phase – voltage – frequency Nominal input Nominal output Weight (with standard cutter head)						ZK115L 150 x 115 mm (57/8 x 41/2 in.) 216 x 40 mm (81/2 x 19/16 in.) 190 x 80 mm (71/2 x 31/8 in.) 0 – 60° 4700 rpm 3000 rpm 23.5 m/s (72.2 ft/sec.) 230 V 50/60 Hz 2100 W (2.8 hp) 1440 W (1.9 hp) 21 kg (46.3 lbs)
	Accessories Guide rail 3 m (9.8 ft) long, (2 pieces with connecting piece) Ref. No. 037037 Guide rail 3 m (9.8 ft) long, (one piece) Ref. No. 200672 Guide rail extension 1.5 m (4.9 ft) long Ref. No. 036553 Pair of adapters for parallel guide fence Ref. No. 037195 Cutter head, Ø 150 x 115 mm (57/8 x 41/2 in.) Ref. No. 091427 3 pieces reversible HL knives Ref. No. 091893 6 pieces reversible HL knives Ref. No. 091894 Clamping bars, cpl. for reversible TCT knives Ref. No. 091893, Ref. No. 037300 Skew notch cutter head cpl., 190 x 81 mm (71/2 x 33/16 in.) Ref. No. 091417 Lap-joint cutter head cpl., Ø 216 x 40 mm (81/2 x 19/16 in.) Ref. No. 091487 Reversible TCT knife, 80 x 12 x 1.5 mm (31/8 x 1/2 x 1/16 in.), Ref. No. 035090 Reversible TCT knife, 40 x 12 x 1.5 mm (19/16 x 1/2 x 1/16 in.), Ref. No. 035087 Clamping device, cpl. for reversible TCT knife Ref. No. 035090, Ref. No. 035085 Clamping device, cpl. for reversible TCT knife Ref. No. 035087, Ref. No. 035083 Reversible scoring knife, TCT 14 x 14 x 2 mm (9/16 x 9/16 x 1/16 in.), Ref. No. 034907 Flat-head gauge screw for scoring knife Ref. No. 034907, Ref. No. 035257