The scheppach dmt 450 is ideal for the hobby woodturner who does not have sufficient dedicated workbench space for his lathe, being small enough to “side“ when not in use. It is also most useful for woodturners who are on the move as it is small enough to transport in the boot of a car.
The powerful 1/2HP induction motor has high torque capacity to allow for turning of heavy timbers without stalling. The precision machined main drive spindle runs on two industrially rated sealed-for-life bearings to maximize support and has a 1“ by 8 tpi thread. The 5 step pulley system with Poly-V belt drive offers a speed range between 650 and 3,000 rpm: speed change being quick and simple. This new scheppach mini lathe has a heavy-duty cast iron bed that ensures stability and minimal vibration.
Distinguished also by its specification, the dmt 450 gives 445 mm between centres and a turning diameter of 254 mm. The tailstock is hollow allowing up to 9 mm long hole boring. This is a well machined lathe that will bring years of turning satisfaction and find a home with many a discerning woodturner. Supplied with tool rest, face plate and revolving centre and a hollow tailstock for long hole boring as standard equipment.
Whoever coined the phrase “small is beautiful“ must have done so with the scheppach dmt 450 in mind.
Stable, torsion resistant grey cast iron construction, plane, polished turning bed, Cast iron spindle stock, tailstock and tool rest, toolrest and tailstock with eccentric clamp, face plate, following centre point, drive centre 4-point, adaptor for M33, 5 spindle speeds, Poly V belt drive.
Technical data
Dimensions (L/W/H)
Bed height
Spindle head thread
Spindle head cone
Tailstock cone
Tailstock bore (hollow spindle)
Distance between centres
Height of centers over bed ° Sleeve adjustment
Spindle speeds
Turning ø over bed
Tool rest length
Face plate ø
Weight approx.
Motor
Input
Output
Speed
Order No.
770mm x 285mm x 375mm
190mm
1“ x 8 TPI
MK2
MK2
9mm
445mm
127°
47mm
650/1,100/1,450/2,000/ 3,000rpm
254mm
150mm
75mm
34kgs
230–240 V/50 Hz
0.37kW (0.5hp)
0.26kW (0.33hp)
1,360rpm
8800 1921
Three-jaw chuck assembly
100 mm, inner capacity 25–87mm, outer capacity 3–93 mm
Order No. 7400 8900
Four-jaw rotary chuck assembly
125 mm, with outer and inner jaws, chuck capacity
inner 37–123 mm, outer 3–93 mm
Order No. 7400 7400
Dog plate
80 mm
Order No. 7400 8800
Face plate
200 mm dia.
Order No. 7400 7500
Screw chuck
Order No. 7400 7200
Cut chuck
dia 30 mm
Order No. 7400 8600
Cut chuck
dia 40 mm
Order No. 7400 7300
Cut chuck
dia. 60 mm
Order No. 7400 8700
Drilling chuck
3–16 mm, with conical arbour
Order No. 7400 7700
Grooving hook chisel
left-hand, 26 mm
Order No. 7400 7911
Round turning chisel
20 mm
Order No. 7400 7910
Pointed turning chisel
20 mm
Order No. 7400 7909
Turning gouge
6 mm
Order No. 7400 7904
Turning gouge
10 mm
Order No. 7400 7905
Turning gouge
20 mm
Order No. 7400 7801
Turning gouge
30 mm
Order No. 7400 7906
Flat turning chisel
6 mm
Order No. 7400 7907
Flat turning chisel
16 mm
Order No. 7400 7803
Flat turning chisel
26 mm
Order No. 7400 7908
Ripping chisel
5 x 15 mm
Order No. 7400 7802
Turning tool set
gouge, flat and pointed chisel
Order No. 6340 8000
Roughing tool
fine casting HSS quality, 10 x 10 mm, face plate copying tracer
Order No. 7971 5005
Pointed tool
copying tracer fine casting, HSS quality, 10 x 10 mm, single reference
Order No. 7971 2016
Tracing roller
for tossing and roughing tools
Order No. 7971 5100
Tossing tool
fine casting, HSS quality, (only with tool holder,
Order No. 7971 5200
for use in rough turning)
Order No. 7971 5204
Turnover cutting tool
fine casting, HSS quality,
(only for use with tool holder, Order No. 7971 5200)
Order No. 7971 5203
Tool holder
for tossing tool and turnover cutting tool
Order No. 7971 5200
Template blank
990 x 90 x 3mm
Order No. 7971 0018