All the performance features of the hms 260 ci planer which guarantee a finish which is unsurpassed by any other similar machine are found in the new scheppach hms 3200 ci. With a 320 mm planing width capacity, this machine is more than suitable for the professional workshop. Heavy duty machined cast iron tables to both surface planer and thicknesser enhance its professional capabilities.
The unique feed system with its automatic cut-off drive incorporates twin feed rollers that are vulcanised with a heavy rubber sleeve. It guarantees a continuous feed rate of 5 m/min even with damp timbers. The folding rear cast iron surface planing table with its corrosion free surface, incorporates a large adjustable tilting fence.
The volume of stock removal is determined by an accurate scale indicator with the facility to work within 1/10th of a millimetre which makes the machine perfect when working with difficult timbers.
traditional manufacturing quality.
Ten scheppach advantages which speak for themselves:
1. Solid cast iron planing & thicknessing tables are the heart and soul of the new “ci“ models.
2. Twin feed rollers vulcanised with a thick rubber sleeve totally eliminate every trace of indentation marks when thicknessing. (See illustration on page 35).
3. Four strong threaded trapeze spindles ensure accurate and easy rise and fall adjustment of the thicknessing table. A final adjustment to 1/10th millimetre over the total planing width guarantees a perfect finish – even on wild grain timbers.
4. Unique clutch mechanism to feed rollers offers safety protection and the possibility to disengage feed rollers when surface planing.
5. Continuous chip removal adjustment when planing together with the accurately machined cast tables ensure utmost planing accuracy.
6. The exceptionally large tilting planing fence, tiltable up to 45° is ideal for optimum guidance of the workpiece.
7. Micro safety switch offers maximum safety protection against inadvertent engaging of the machine when thicknessing before extraction hood is locked in position.
8. Integrated suction system for both surface planing and thicknessing modes ensures compliance with Health & Safety requirements in the workplace.
9. Compliance with “CE“, “GS Safety Tested“ and “GS Wood Dust Tested“ safety requirements guarantees adherence to all safety regulations for both employer and employee in the working environment.
10. Powerful induction motors (single and three phase) allow chip removal even up to 5mm.
Standard equipment
Powder-coated base, surfacing tables and thicknessing table made of grey cast iron, discharge table tiltable, planing fence adjustable and tiltable, rubber-lined feed rollers, disconnectable feed gearing, cutter block with two HSS planing knives, integrated discharge hood for surface and thicknessing planing, tool for knife changing part of standard equipment.
Technical data
Dimensions ( L / W / H )
Surfacing table size
Table height
Thicknessing table size
Drive speed plane shaft
Feed speed
Suction connector
Weight approx.
Planing data
Surface planing:Plane width
Max. Stock removal
Thicknessing:
Clearance height/width
Max. stock removal
1,460mm x 850mm x 960mm
1,320mm x 380mm
820mm with base unit
590mm x 310mm
6,500rpm
5m/min
100mm
202kgs
320mm
5mm
180mm /310mm
5mm
Input
Output
Speed
Brake
Motor protection
Switch/plug unit with no-volt release
Order No.
2.7kw (3.7hp)
2.0kw (2.8hp)
2,800rpm
yes
yes
yes
6241 0901
3.8kw (5.2hp)
3.0kw (4.1hp)
2,840rpm
yes
yes
yes
6241 0902
Wheel base
Order No. 6241 5000
HSS planing knives
2 knives
Order No. 6241 3500
TCT planing knives
2 knives
Order No. 6241 3600
Disposable HSS planing knives
2 knives
Order No. 6023 4200
Knife holders
2 knives
Order No. 6023 4100
Wall console
As attachment holder for all attachments in the scheppach Combi-System.
Order No. 7943 0000
Anti-corrosion agent Spray, 300 ml,
CFC-free
Order No. 6100 9800
Pharmol HEK
Resin removal concentrate
Order No. 6100 9700
Pharmol Dry lubricant spray
400 g, for enabling smooth gliding of workpieces over the planing tables.
Order No. 6100 9500
