Scheppach rabt16x

The answer to your drilling problems – the rab t16x radial drill press. With the radial drill press, scheppach brings the position of the drill exactly where you want it. They can be angled, extended, and positioned in all manner of directions.

The machined extensions of the rab drills swing to both sides.

The clearance between spindle and column can be adjusted from 165 mm to 330 mm – the table height being adjustable.

The cast iron table can be tilt in both directions up to 45 degrees.

The table of the rab s16x can be pivoted through 360 degrees.

With all rab models the drilling speed is controlled by pulleys.

Standard equipment Radial drill press with angle adjustment, height adjustable and tilting cast iron table top, solid base plate, machined extension arm, adjustable drilling depth stop with scale, chuck guard, quick lock chuck.

Test certificates Technical data Dimensions ( L / W / H ) Table size Chuck clamping range Cone seat spindle Cone seat drill chuck Spindle travel Spindle speeds Dist. spindle/column Extension arm Radial adjustment Swinging range Table swinging range ° Dist. table/chuck Dist. foot/chuck Column dia. Extension arm dia. Weight Motor Input Order No.

CE 840 x 320 x 935mm 195mm x 195mm 3mm–16mm MK 2 B 16 80mm 460/730/1,130/1,670/2,480rpm 125mm–445mm 320mm left 70°, right 60° left/right 45° max. 365mm max. 485mm 59.5mm 59.5mm 37kgs 230 V/50 Hz 550w 8800 1908