When it comes to cutting wall and floor trim panels – moulding strips – door and window frames: a scheppach mitre saw takes them all in its stride and will produce a clean and precise cut every time. They are easy to transport so are equally at home on site or in the workshop.
A major consideration when choosing the right mitre saw is the motor unit. Both scheppach tkg 260i and tkg 305i mitre saws are powered with induction motors which are quiet and suitable for operating in noise sensitive areas, compared to many others which have noisy universal brush motors and require much more maintenance.
Combination mitre saws which include a sawbench facility are perfect for precise crosscuts, angle and compound angle cuts, but can also be used for ripping. The scheppach tkg 260i gives an impressive 150 mm width of cut and a 40 mm depth of cut when ripping. In angled mode the head tilts through 45 degrees and the base rotates through 45 degrees to allow for sawing bevels, mitres and compound mitres. The saw table measures 410 x 280 mm and is made from a die casting for utmost accuracy. The rip fence is held rigidly in position and will not wander under pressure. To adjust the depth of cut you simply raise or lower the saw table.
The powerful 1.6HP induction motor incorporates a soft start which eliminates any initial jolt start and safety is enhanced by the motor brake which brings the sawblade to a standstill within seconds of releasing the trigger switch. You may feel spoilt for choice when it comes to choosing the right mitre saw: that is until you look the scheppach tkg 260i.
Diecast aluminium rotary plate and table top, aluminium frame, powder coated, aluminium table plate for ripping cuts, with scale for rippng fence, smooth running induction motor, locking pin for grid positions with additional clamp, workpiece stop for mitre cuts left and right usable, TCT sawblade, tool for changing the sawblade
Technical details
Dimensions (L/W/H)
Work surface
Table size
Sawblade ø /teeth
Tilt area
– Mitre angle
– Slope angle
rpm
Grid position by
Extraction connector ø
Weight approx.
Cutting details
Cutting height max at 90/45°
Cutting width max at 90/45°
Cutting height over table
Cutting depth at 90°
Cutting depth at 45°
Motor
Input
Output
Order No.
470mm x 460mm x 580mm
410mm x 280mm
250mm /24t
2° x 45°
1° x 45°
2,850rpm
0/15/22.5/30/45
28mm/40mm
17kgs
40mm
150mm x 50mm
95mm x 50mm
230 V/50 Hz
1.2kW (1.6hp)
8932 0903
Screw clamp
Order No. 8932 0706
Crosscut/mitre gauge
Order No. 8932 0705
Dust bags
For all Scheppach undercut/mitre saws
Order No. 8932 0707
Base Unit
for all Scheppach undercut/mitre saws, folding, adjustable to 4 heights, table height 780 mm
Order No. 8932 0703
Base Unit
For all Scheppach undercut/mitre saws.
table height 780 mm
Order No. 8932 0704
