Scheppach tkg305i
Scheppach tkg 305i mitre saw. Big precise cutting capacity on site – suitable for right and left hand users. Whether you are cutting tubes to length – cutting profiles – mitre cuts – cutting panels – flooring – or ripping, the scheppach tkg 305i combined mitre saw will do them all and is also suitable for ripping. The powerful dust protected 1.9 HP induction motor will provide years of maintenance free service and is equipped with a brake which will bring the sawblade to a standstill in under ten seconds. The precision cast aluminium machined base and saw table guarantees the highest quality precision cuts in both mitre and ripping cutting modes. The tkg 305i offers a cutting capacity of 160 mm wide and ripping to a depth of 50 mm. In angled mode the head tilts through 45 degrees and the base rotates through 45 degrees to allow for sawing bevels, mitres and compound mitres. It is not difficult to understand why the scheppach tkg 305i is the choice of the professional. scheppach mitre saws: worth more than a second look.
A major consideration when choosing the right mitre saw is the motor unit. Both scheppach tkg 260i and tkg 305i mitre saws are powered with induction motors which are quiet and suitable for operating in noise sensitive areas, compared to many others which have noisy universal brush motors and require much more maintenance.
Standard equipment Diecast aluminium rotary plate and table top, aluminium frame, powder coated, aluminium table plate for ripping cuts, with scale for rippng fence, smooth running induction motor, locking pin for grid positions with additional clamp, workpiece stop for mitre cuts left and right usable, TCT sawblade, tool for changing the sawblade.
Test certificates Technical details Dimensions (L/W/H) Work surface Table size Sawblade ø /teeth Tilt area – Mitre angle – Slope angle rpm Grid position by Extraction connector ø Weight approx. Cutting details Cutting height max at 90/45° Cutting width max at 90/45° Cutting height over table Cutting depth at 90° Cutting depth at 45° Motor Input Output Order No.		CE 470mm x 460mm x 660mm 410mm x 280mm 300mm /40t 2° x 45° 1° x 45° 2,850rpm 0/15/22.5/30/45 28mm/40mm 20kgs 50mm 160mm x 70mm 100mm x 70mm 230 V/50 Hz 1.4kW (1.9hp) 8932 0904
Accessories Screw clamp Order No. 8932 0706 Crosscut/mitre gauge Order No. 8932 0705 Dust bags For all Scheppach undercut/mitre saws Order No. 8932 0707 Base Unit for all Scheppach undercut/mitre saws, folding, adjustable to 4 heights, table height 780 mm Order No. 8932 0703 Base Unit For all Scheppach undercut/mitre saws. table height 780 mm Order No. 8932 0704