Scheppach ts2000
Large machine accuracy that will fit in the boot of a car – the ts 2000 circular sawbench. With the ts 2000, the versatility and precision of a professional machine is now available for the smallest workshop. It can even be transported in the boot of a car. Simply lift the saw from its base (no tools required) and fold the base to the size of a briefcase. The optional profile table extension panels work on the “tongue and groove” principle and quickly slot together to form a large table surface when required. We've learned from years of experience. The ts 2000 is full of scheppach innovations developed over many years. Both the cutting height and angle setting are adjusted with the same precision by means of the scheppach “Duplex” system. All settings, when locked, remain constant. The height adjustment can be read accurately in the magnifying window and the angle setting off the ring scale. Precise end stops are provided for the 0 and 45 degree positions. The angled mitre fence can be continuously adjusted up to 60 degrees on both left and right hand settings.
Standard equipment Precision ripping fence with fine adjustment, magnifying glass, turning fence rail, crosscut/mitre gauge, sawblade guard, suction connector, push stick, push grip and assembly tool, TCT sawblade
	Table width extensions are mounted in seconds.
			The rip fence slides without backlash on the guide rail.
The folding stop on the fence rail incorporates micro adjustment to 1/10th mm.
						The standard mitre attachment is adjustable to 60 degrees on both left and right settings.
Test certificates Technical data Dimensions (L / W / H) Table size Table height Sliding carriage Sawblade Ø / teeth Height adjustment – Sawblade Ø Height adjustment Tilting range Speed Cutting speed Ripping fence length Angle fence Suction connector Ø Weight approx. Cutting data Cutting depth at 90° Cutting depth at 45° Cutting width or depth – with ripping fence – with table width extn. – with angle fence mm – with sliding carriage						CE, GS, sawdust tested 720mm x 450mm x 300mm 610mm x 450mm 480mm/860mm with base unit 200mm Ø / 24 t 0–60mm 45° 5,120rpm 54m/sec 580mm 2 x 60° 50 e 100mm 33kgs 60mm 48mm 145mm 415mm 250mm 620mm
Motor Input Output Speed Brake Motor protection Switch/plug unit with no-volt release Order No.						220 – 240 V /50 Hz 1.8kw (2.5hp) 1.2kw (1.6hp) 2,800rpm no yes yes 5320 0000		380 – 420 V /50 Hz 1.8kw (2.5hp) 1.35kw (1.8hp) 2,800rpm no yes yes 5321 0000
Accessories Wheel base Order No. 5320 7200 Base unit Foldable Order No. 5320 7000 Sliding table carriage With precision angle fence, adjustable to 60° left and right, guide rail 950 mm long. Order No. 5320 8100 Table width extension Foldable, 610 x 250 mm Order No. 5320 8000 Table width extension push-on, 610 x 250 mm Order No. 5320 7900 Table length extension 575 x 250 mm Order No. 5320 8300 For sawblade information click here