Scheppach rolling table circular saw for both ripping and crosscutting are known for their precise control and light table movement. The table is made of well-seasoned wood and is decay free. The drive from the motor to the saw spindle is via a heavy duty v-belt that absorbs any impact from the sawblade.
The rolling table saws have the proven "GS" safety standard. All Scheppach circular saws comply with the "CE-Norm" and were developed in conjunction with the German Agricultural Trade Association, which attaches the utmost importance to all safety standards. Braked motors bring the sawblade to a halt in seconds. If the event of a power cut, the no-volt release ensures that the motor cannot start up without the operator switching the machine on. All Scheppach saws are tested for accident protection.
The universal saw - the Scheppach ke70m.
The three phase AC induction motor on the ke70m runs the 700mm diameter sawblade at 1,400rpm. AV-belt transfer makes possible length section cutting at 2,500rpm with a sawblade diameter of 500mm.
Stable angle-iron frame, wood table with hardwood ply, saw blade guard, TG saw blade, length stop, cross cut gauge, snap action chuck, 2 cutting speeds, push stick, pushing handle, assembly tools.
Technical details
Dimensions (L / W / H)
Table size
Table height
Saw blade dia.
Saw blade teeth
Length stop length
Weight approx.
Cutting details
Cutting height
Drive details
Input
Output
Motor rated
Speed
Brake
Motor guard
Star triangle switch
Switch with - no volt release and reverse
Order No.
860 x 1,460 x 1,210mm
1,400mm x 860mm
850mm
700mm
56 t
1,025mm
190kgs
250mm
400 V/50 Hz
5.0 kw (6.8 hp)
4.0 kw (5.5 hp)
100% Continuous
1400rpm
YES
YES
YES
YES
1285 0000
Transport wheel kit
Simple transport through trouble free suspension and lifting.
Order No. 1001 1200
Circular sawblade CV
Ø 500mm x 30mm WZ 56 teeth
Order No. 1002 3205
Circular sawblade HW
Ø 500mm x 30mm WZ 44 teeth
Order No. 5600 9102
Circular sawblade TG
Ø 700mm x 30mm WZ 56 teeth
Order No. 1001 3207
Circular sawblade CV
Ø 700mm x 30mm WZ 56 teeth
Order No. 1002 3207
Circular sawblade HW
Ø 700mm x 30mm WZ 44 teeth
Order No. 1310 8001
Carrier - Transport device
for 3-point add-on category I and II
Order No. 1340 1000
Stripper device sch375
with stripper disk, support table and protective casing (only used with saws not having firewood splitter).
Order No. 1053 0000
Stripper blades
set of four
Order No. 1053 2000
